Fortrezz.com

Home Products MIMO

MIMOlite module-th    

Discover other products and videos on our YouTube channel

Description

Make virtually any device speak Z-wave!

* Connect up to four wired devices to Signal inputs and make them wireless.
* Connect them functionally to your Home Security panel OR to your z-wave home automation network
* Connect high or low 16V digital signals
* Connect pulse reading devices
* Connect analog signals

The MIMO (Multiple Input - Multiple Output) Module is an interface / bridge module, capable of converting up to two digital & analog voltage & pulses
inputs and/or a Z-Wave™ RF message input to one or two dry contact relay outputs and/or a Z-Wave™ RF message output. The MIMO is ZWave™ Wireless device compatible with other Z-Wave™ certified products.

Follow MIMO technical appendix on fortrezz web site for details on changing configurations. In addition, for OEM orders the MIMO can be purchased as a standard pcb -only assembly. For a OEM order, customized size pcb contact Fortrezz sales for a quote.

Specifications

Power: 12 to 16 volts DC from regulated Power supply @~ 500mA capability
Frequency Range: 908.4MHz (US); 868.4MHz (EU)
Distance Range: Max 100ft line of sight in unobstructed environment
PCB Size (LxW): 2.68" (68mm) x 3.7" (94mm)
Enclosure Size (LxWxD): 4.53" (115mm) x 3.54" (90mm) x 2.16" (55mm)
Weight: 6 OZ (170 gram)
Operating Temperature: -10⁰C (14F) to +70⁰C (158F)
Input Signal 1 & 2 (SIG1 & SIG2): Digital or Analog Input 0 to 16V DC or 16 Hz Max for pulse counting (minimum 32 ms high or low time). The
trigger levels and hysteresis can be set via the Configuration Command Class for the two endpoints.
0V to 1V -- considered a Digital LOW
1V to 1.45V -- considered gray area, hysteresis
1.45V to 16V -- considered a Digital HIGH
Input Signal Impedance Input IMPEDANCE for any of the MIMO signals Z=66 ohm at 10KHz . This impedance is = 66 ohm = 34 ohm + j
540uH. (Refer to Technical Appendix for characteristic Smith / S11 charts.)
Output Relay 1: DPDT, Max. Switching power of 62.5 VA or 60W; 10uA to 2A; High Dielectric strength coil-contacts: 1,000 VAC;
Open contacts: 750 VAC; Conforms to FCC Part 68 requirements; Ag + Au clad bifurcated contacts fully sealed.
Output Relay 2: DPDT, Max. Switching power of 62.5 VA or 60W; 10uA to 2A; High Dielectric strength coil-contacts: 1,000
VAC;
Open contacts: 750 VAC; Conforms to FCC Part 68 requirements; Ag + Au clad bifurcated contacts fully sealed.
System Requirement: Any Z-WaveTM -enabled network and controller.

Files & Installation Instructions

Files:
MIMO2 Config Manual HOT

Download



Created
Size
Downloads
2015-10-11 19:19:08
699.42 KB
2,641

MIMOConfig Installer HOT

Download



Created
Size
Downloads
2013-11-03 03:32:11
9.03 MB
6,594

MIMOConfig Manual HOT

Download



Created
Size
Downloads
2013-11-01 18:46:41
402.94 KB
4,396

MIMO User Manual HOT

Download



Created
Size
Downloads
2016-09-02 11:05:00
790.54 KB
6,245

MIMO Technical Appendix HOT

Download



Created
Size
Downloads
2013-07-30 11:06:20
216.39 KB
3,998

MIMOconfig Installation Instructions:
- Windows XP or later
- Unzip MIMOconfigInstaller.zip and run setup.exe
- Select MIMOconfig under the Start menu to run the program
- A user manual will be installed in your Start menu under the MIMOconfig folder